Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
- 11. Brake system
   11.1. Technical characteristics
   11.2. The vacuum amplifier of brakes
   11.3. Adjustment of brakes
   11.4. The switch of a signal of braking
   11.5. Removal and pedal installation
   11.6. The main cylinder of brakes
   11.7. The dosing out valve
   11.8. A regulator of pressure of back brakes (1992-98)
   11.9. The control valve of the amplifier of brakes
   11.10. Hoses and tubes
   11.11. Removal of air from a hydrodrive of brakes
   + 11.12. Forward disk brakes
   + 11.13. Back drum-type brakes
   + 11.14. Back disk brakes (1992-98)
   - 11.15. A manual brake
      11.15.1. Adjustment of a cable (1983-91)
      11.15.2. A cable of a manual brake
      11.15.3. The lever of a manual brake
      11.15.4. Колодки a manual brake
   11.16. Antiblocking system (ABS)
   11.17. The hydromodule
   11.18. The overload gauge
   11.19. The gauge of speed
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes

11.15.3. The lever of a manual brake

THE GENERAL DATA

The lever of a manual brake


1. A cable 2. An arm 3. The plug 4. A platen cover 5. A socket 6. The switch	7. The lever A.Uplotnitel B.Smazat V.Kryshka G.Mesto of drawing of hermetic 8661 or 8663

Removal and installation

PERFORMANCE ORDER

1. Disconnect a cable from an equalizer lath.

2. Working in salon, remove floor sections and a box, remove an arm of floor section.

3. Turn away bolts and remove an arm of a manual brake, get the plug.

4. Remove a cover of the platen of a drive of a manual brake.

5. Disconnect wires and remove the switch of an alarm lamp of a manual brake.

6. Remove the brake lever.

7. Installation is carried out upside-down.